50 g-100 mg Analytical Precision Class 00 Weight Set with NVLAP Accredited Certificate

Part # 7230-002W

Part # 7230-002W

Availability: In stock

Class
Class 00
Used as a primary reference for calibrating other reference standards and weights. Class 00 weights are intended to be used in metrology laboratories where the stability of the environment and careful handling are assured. Although very stable, one-piece construction Class 00 weights have no method of adjustment and are not suitable for general laboratory use. Class 00 weight tolerances are equal to OIML R111 Class E1 tolerances and are tighter than Class 0. The uncertainty is guaranteed to be 1/3 of the tolerance. Class 00 is pending approval of ANSI/ASTM E617.

Certificate
NVLAP Accredited Certificate
Troemner's NVLAP Accredited Certificate provides compliance in both measurement process and data reported to the customer to meet a variety of standards including NVLAP Handbook 150-2, ISO/IEC 9000, ISO/IEC 17025, FDA, GMP. GLP, DOD, ANSI/NCSL Z540-1 and nuclear requirements. Troemner's NVLAP Laboratory Code is 105013-0. The NIST administered National Voluntary Laboratory Accreditation Program (NVLAP) approves, through periodic audits, all processing and weighing procedures, as well as certificate format and content. Calibration procedures vary by tolerance class requested. For example, for higher accuracy classes such as Troemner UltraClass Series, ANSI/ASTM E617 Class 000, 00, 0 and 1, OIML R 111 Class E0, E1, E2 and F1, Troemner performs a multiple weighing procedure utilizing standards to determine the mass of a customer's weight.
Click here to view the sample certificate.

Weight Set Details
Part #7230-002WSet Contents50 g, (2) 20 g, 10 g, 5 g, (2) 2 g, 1 g, 500 mg, (2) 200 mg, 100 mgConstructionOne-piece
Weight Set Range50 g-100 mgNumber of Pieces12Dimensions (Weight in Case)8 x 7 x 3.5"
Capacity100 gMaterialWeights 1 g and above are Troemner Alloy 8. Weights below 1 g are 304 Stainless Steel.CaseSupplied in a high quality polycarbonate case with a compartment for each weight as well as compartments for a brush, forceps and USB flash drive.
ClassClass 00DensityWeights 1 g and above are 8.03 g/cm3 at 20°C. Weights below 1 g are 7.95 g/cm3 at 20°C.OriginManufactured in the USA
CertificateNVLAP Accredited CertificateStyleWeights 50 kg through 1 g are cylindrical with handling knob
Weights 500 mg and below are flat with one end turned up for easy handling
PriceCall us for pricing


Literature & Reference