Troemner leverages its expertise and commitment to offer Calibration Services that meet all of your measurement and compliance needs including Temperature, Pressure, Humidity, Dimensional, Pipette, Weight, Electrical, Time & Frequency, and Thermal Mass Flow.

Calibration Devices QuickLINKS:
> Calibration Devices - Alphabetical List
> Calibration Devices Listed by Service


Calibration Services Include:

	Temperature Calibrations from -196° C to 660ºC are NVLAP* accredited. While we have the capability to perform calibrations up to 1100ºC, these are not NVLAP* accredited but ISO/IEC 17025 compliant.
	Pressure Calibrations from 0 to 1000 psi with accuracy as low as 0.003% of reading - Types of instruments serviced by Troemner include gauges, transducers, calibrators, monitors and dead weight testers. Four standard levels of service as well as custom services are available. NVLAP* accredited calibrations.
	Humidity Calibrations from 10% to 95% - NVLAP* accredited calibrations on a wide variety of humidity measurement devices including chart recorders, data loggers, hygrometers, hygrothermographs, sensors, humidity generators, and dewpoint hygrometers.
	Pipette Calibrations from 0.1 µl up to 10 ml are NVLAP* accredited with capabilities up to 100 ml.
	Dimensional Calibrations NVLAP* accredited from 0.05" to 10" with capabilities up to 18" for calipers, micrometers, depth gauges, and rulers. Precision ± 1/1000 of an inch for rulers.
	Thermal Mass Flow Calibrations from 2 sccm to 100 slpm - Troemner can repair, resize, calibrate, and provide ISO/IEC 17025 compliant certificates for thermal mass flow meters and controllers from virtually any manufacturer. Variable volume meters (rotameters) can also be calibrated and services.
	Weight Calibrations from 0.050 mg to 2000 kg (0.00001 oz to 5000 lb) - Services Include NVLAP* and UKAS** Certificates of Calibration, NVLAP* Density Determination Calibrations and NVLAP* Magnetic Susceptibility Determination Calibrations.
	Electrical Calibrations are NVLAP* accredited and include DC Voltage, DC Current, AC Voltage, AC Current, DC Resistance, Capacitance and AC/DC Power.
	Time and Frequency Calibrations ISO/IEC 17025 compliant calibrations are available for timers, stopwatches, frequency/timer counters and synthesizers.

You can count on Troemner for:

Consistency - We address every variable of our measurement process to assure consistency of calibration results, which leads to accurate results in your processes, products and services.

• Strict Environmental Controls – Troemner maintains one of the largest and most advanced state-of-the-art independent metrology laboratories in the world with excellent controls to keep the environment stable.
• Finest Equipment – For each measurement discipline, Troemner possesses the finest calibration equipment available.
• Highly Skilled Metrologists and Technicians – Troemner has a highly trained staff of metrologists and technicians capable of making precise measurements and monitoring calibration processes.
• Measurement System –Troemner’s measurement system is rigorously reviewed. Our multiple primary standards are directly traceable to NIST.

Confidence - Troemner assures its consistency through independent verification.

• Proprietary Calibration Software – Our software verifies the accuracy of each measurement, reduces errors and identifies measurements that fall outside acceptable limits to eliminate the possibility of a suspect calibration leaving the building.
• Documented Procedures – Procedures are documented for every step of the calibration process.
• Registration and Accreditation – Troemner’s Calibration System is ISO 9001 registered and conforms to ISO/IEC 17025 and ANSI/NCSL Z540-1 standards. Troemner is NVLAP* (NVLAP Lab Code
  105013-0) accredited for many of its measurement disciplines including mass, temperature, pipettes, humidity and pressure. Troemner is also a UKAS** Accredited Calibration Laboratory No. 0516 for mass calibration.

Customized - Troemner can tailor a calibration or certificate to meet your specific needs.

• We offer several levels of service and certificates for each calibration.
• We can add needed information to your certificates and compliance documentation.
• Adjustment, repair and calibration all from one source – Troemner is a full service laboratory and can make adjustments and repairs for many types of calibration devices upon your request.

*NVLAP Lab Code 105013-0
**A UKAS Accredited Calibration Laboratory No. 0516