QuickLINKS:
> General Information
> Tolerances
> Construction and General Shape
> Surface Finish
> Ordering a Certificate With Your Weight
or Weight Set
> Ordering Tables

 
Cast Iron Class F Grip Handle Weights General Information

Cast Iron Class F Grip Handle Weights are primarily used to test commercial weighing devices by state and local weights and measures officials, device installers and service technicians. Cast Iron Class F Grip Handle Weights may be used to test most accuracy Class III scales, all scales of Class III L or IIII, and scales not marked with a Class designation. Class F is also acceptable for use verifying scales that have a 0.1% accuracy and lower. Cast Iron Class F Grip Handle Weights larger than 5 kg / 10 lb are legal for trade, which means their design is acceptable for use in checking weighing devices where the price of the item being purchased is based on its weight. Cast Iron Class F Grip Handle Weights 5 kg / 10 lb and smaller are not legal for trade and are classified as ANSI/ASTM Class 6. If you require a 2 kg or 5 lb weight for a legal for trade application, see the Stainless Steel Test Weights section on the web site.

 
Tolerances

 
Construction and General Shape

Troemner's Cast Iron Grip Handle Weights are manufactured from a high quality iron that meets NIST Handbook 105-1 specifications for hardness. Castings meet surface roughness requirements of NIST Handbook 105-1 and are free of cracks, pits and sharp edges. Adjusting cavities are in each weight and the cavity opening is located on the side of the weight to meet NIST Handbook 105-1 specifications. Adjusting cavities are sealed with a lead plug and steel back-up spacer to provide a tamper resistant seal of the adjusting cavity. Weights are protected by a durable coat of paint – gold for metric and silver for avoirdupois – to protect the casting from rusting. Weights 50 kg / 100 lb and below are designed to be picked up and handled by hand. Weights above 50 kg / 100 lb are designed to be picked up and handled by means of a hook. For dimensions of cast iron grip handle weights, please see the dimension tables below.

Avoirdupois Cast Iron Grip Handle Weights
Metric Cast Iron Grip Handle Weights

 
Surface Finish

 
Ordering a Certificate With Your Weight or Weight Set

• Weights and weight sets supplied without weight certificates come with Troemner's Statement of Accuracy (view sample of certificate).
   
  
• To order Troemner's NVLAP Weight Calibration Certificate (view sample of certificate), specify the Troemner part number followed by "W". For part numbers, please reference the Ordering Tables below.
   
  
• To order Troemner's Traceable Certificate (view sample of certificate), specify the Troemner part number followed by "T". For part numbers, please reference the Ordering Tables below.

 
Ordering Tables

Avoirdupois Cast Iron Grip Handle Weights
Metric Cast Iron Grip Handle Weights