We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
10 x 10 Advanced Ceramic Top Hotplate-Stirrer, 120V
PART #
984TA0CHSUSA
$724.24
| PART # | 984TA0CHSUSA | Control Type | Analog with Temperature LED | Unit Type | Heating and Stirring |
|---|---|---|---|---|---|
| Frequency | 50/60 Hz | Voltage | 120V | Amps | 12.9 |
| Watts | 1550 | Top Plate Material | Ceramic | Top Plate Dimensions | 10 x 10" (25.4 x 25.4cm) |
| Temperature Range | Ambient +5° to 500°C | Temperature Stability | ± 3% | Temperature Stability Disclaimer | Below 100°C ± 2°C. Environmental and sample conditions permitting. |
| Speed Range | 60 to 1600 rpm | Speed Stability | ± 2% | Maximum Capacity H2O | 6000 mL |
| Dimensions | 17.9 x 13 x 4.3" (45.5 x 33 x 10.9cm) |
Operating Conditions | Units can be run in conditions from 5 to 40°C (41 to 104°F), 20% to 80% relative humidity, non-condensing. | Certifications | TUV Listed |
| Warranty | 5 year industry leading limited warranty on parts and labor | Unit Supplied With | Unit includes a 92" (234cm) detachable, 3-wire cord and plug. Unit is also supplied with a 1.5" (3.8cm) PTFE coated stir bar. | Origin | Manufactured in the USA |
| Price | 724.24 |
- Excellent temperature uniformity
- Microprocessor controlled
- Cool touch, chemical resistant housing
- LED display for temperature
- 5 year industry leading warranty
Talboys Advanced hotplates, stirrers and hotplate-stirrers deliver accurate and repeatable results. These units are microprocessor controlled and have an LED display for temperature. Control panel features easy-to-use controls which allow users to dial in adjustments. Rear housing features an integral support rod holder with locking knob to accept the optional support rod and clamp kit.
Hotplate-Stirrer is supplied with a 1.5" (3.8cm) PTFE coated stir bar. Unit includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions: Hotplate-Stirrer can be run in conditions from 5 to 40°C (41 to 104°F), 20% to 80% relative humidity, non-condensing.
| Microprocessor Control | Advanced electronics regulate both heating and stirring and bring samples to temperature quickly and efficiently. RTD accurately measures and controls temperature. Precise speed control provides consistent stirring at all speeds. Powerful continuous duty motor delivers dependable and reliable stirring. |
| Control Panel | Adjustment knob for temperature displays set-point in LED display. Stir control knob has rpm adjustment markings. |
| LED Display | Shows set-point temperature. Display is easy-to-read and provides repeatable and accurate results every time. |
| Top Plate Material | Ceramic tops feature a chemical resistant, reflective white top plate surface that is easy to clean. Durable aluminum tops will not crack or chip, and provide a more even temperature distribution. |
| Recall Last Temperature | Built-in memory allows users to recall last set temperature, even when unit has been turned off. |
| Heating Capacity | Robust heater allows heating surface to reach set point quickly. |
| Built-In Support Rod Holder | Rear housing features an off centered, built-in support rod holder with locking knob that accepts the optional Support Rod and Clamp Kit. |
| Low Profile Design | Takes up minimal space and fits easily into fume hoods. Spill-resistant design channels fluids away from internal components. |
| Cool Touch Housing | Housing is made of a heat resistant polymer that is not only cool to the touch, but is also chemical resistant. |
| Hot Top Indicator | For additional safety, hot symbol warning light is illuminated when heat is turned on and remains on until top plate cools down. |
| Stir Protection | If stirrer motor stops or fails, unit will automatically shut down heater. |
| Speed Ramping Feature | Slowly increases motor speed for improved safety and enhanced coupling. Avoids splashing, improves spin bar control, and provides excellent low end speed control. |
For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.
For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.
Click here for complete voltage details and plug types by country
(Size: 465 KB)
Instruction Manual for Talboys Professional Series Hotplates, Stirrers and Hotplate Stirrers
(Size: 1 MB)
The Lab Equipment Guide offers a brief overview of our products for quick reference.
(Size: 2.3 MB)
Comprehensive guide for multi-purpose and specialty clamps, connectors and holders, lab-lifts, lab-frame kits, and gas cylinder safety supports.
(Size: 573.2 KB)
Talboys Light Duty, Medium Duty, Heavy Duty and High Speed Overhead Mixers and Accessories