20 kg-1 g OIML Precision Class UltraClass Gold Weight Set with NVLAP Accredited Certificate

Part # 7406-UCGW

Part # 7406-UCGW

Inside a heavy-duty resin case, there is a compartment holding a polycarbonate case containing weights 500 g and below. 1 kg and 2 kg weights are held in their individual polycarbonate weight cases inside a cut out. For weights 5 kg and larger, a compartment for each weight exists within the resin case (50 kg weights are not supplied in a case, however a case can be purchased separately). There are also compartments for lifters and forceps supplied with each set. Weight sets where the largest weight is 10 kg and above are supplied with a Complete Accessory Kit which includes a microfibre cloth, nylon glove, small and wide brushes, and forceps.

Availability: In stock

Class
UltraClass Gold
The weight tolerance is equal to ANSI/ASTM E617 Class 00 and OIML R 111 Class E1. This class is used as a reference standard for calibrating other reference standards and weights where the stability of the environment and careful handling are assured. This class is appropriate for calibrating high-precision analytical balances with a readability as low as 0.001 mg.

Certificate
NVLAP Accredited Certificate
Troemner's NVLAP Accredited Certificate provides compliance in both measurement process and data reported to the customer to meet a variety of standards including NVLAP Handbook 150-2, ISO/IEC 9000, ISO/IEC 17025, FDA, GMP. GLP, DOD, ANSI/NCSL Z540-1 and nuclear requirements. Troemner's NVLAP Laboratory Code is 105013-0. The NIST administered National Voluntary Laboratory Accreditation Program (NVLAP) approves, through periodic audits, all processing and weighing procedures, as well as certificate format and content. Calibration procedures vary by tolerance class requested. For example, for higher accuracy classes such as Troemner UltraClass Series, ANSI/ASTM E617 Class 000, 00, 0 and 1, OIML R 111 Class E0, E1, E2 and F1, Troemner performs a multiple weighing procedure utilizing standards to determine the mass of a customer's weight.
Click here to view the sample certificate.

Weight Set Details
Part #7406-UCGWSet Contents20 kg, 10 kg, 5 kg, (2) 2 kg, 1 kg, 500 g, (2) 200 g, 100 g, 50 g, (2) 20 g, 10 g, 5 g, (2) 2 g, 1 gDimensions (Weight in Case)24.6 x 19.7 x 11.7" (62.5 x 50 x 29.7 cm)
Weight Set Range20 kg-1 gNumber of Pieces18CaseSupplied in a heavy-duty, lightweight and shatter resistant resin case. Includes a cutout for the polycarbonate case containing weights 500 g and below. 1 kg and 2 kg weights are held in their individual polycarbonate cases inside of a cutout. Weights 5 kg and larger also have their own cutout, but are not supplied in an individual case.
Capacity40 kgMaterialWeights above 1kg are 316 Stainless Steel, Weights 1kg and below are Troemner Alloy 8OriginManufactured in the USA
ClassUltraClass GoldDensityWeights above 1kg are 7.95 g/cm3 at 20°C, Weights 1kg and below are 8.03 g/cm3 at 20°CPriceCall us for pricing
CertificateNVLAP Accredited CertificateStyleCylindrical with handling knob  


Literature & Reference