7 x 7 Advanced Alumimum Top Hotplate, 120V
|PART #||984TA7AHPUSA||Control Type||Analog with Temperature LED||Unit Type||Heating|
|Watts||950||Top Plate Material||Aluminum||Top Plate Dimensions||7 x 7" (17.8 x 17.8cm)|
|Temperature Range||Ambient +5° to 400°C||Temperature Stability||± 2%||Temperature Stability Disclaimer||Below 100°C ± 2°C. Environmental and sample conditions permitting.|
|Maximum Capacity H2O||2500 mL||Dimensions||14.8 x 9.9 x 4.3"
(37.6 x 25 x 10.9cm)
|Operating Conditions||Units can be run in conditions from 5 to 40°C (41 to 104°F), 20% to 80% relative humidity, non-condensing.|
|Certifications||TUV Listed||Warranty||5 year industry leading limited warranty on parts and labor||Unit Supplied With||Unit includes a 92" (234cm) detachable, 3-wire cord and plug.|
|Origin||Manufactured in the USA||Price||462.42|
- Excellent temperature uniformity
- Microprocessor controlled
- Cool touch, chemical resistant housing
- LED display for temperature
- 5 year industry leading warranty
Talboys Advanced hotplates, stirrers and hotplate-stirrers deliver accurate and repeatable results. These units are microprocessor controlled and have an LED display for temperature. Control panel features easy-to-use controls which allow users to dial in adjustments. Rear housing features an integral support rod holder with locking knob to accept the optional support rod and clamp kit.
Hotplate is supplied with a 1.5" (3.8cm) PTFE coated stir bar. Unit includes a 5 year, industry leading limited warranty on parts and labor.
Operating Conditions: Hotplate can be run in conditions from 5 to 40°C (41 to 104°F), 20% to 80% relative humidity, non-condensing.
|Microprocessor Control||Advanced electronics regulate both heating and stirring and bring samples to temperature quickly and efficiently. RTD accurately measures and controls temperature. Precise speed control provides consistent stirring at all speeds. Powerful continuous duty motor delivers dependable and reliable stirring.|
|Control Panel||Adjustment knob for temperature displays set-point in LED display. Stir control knob has rpm adjustment markings.|
|LED Display||Shows set-point temperature. Display is easy-to-read and provides repeatable and accurate results every time.|
|Top Plate Material||Ceramic tops feature a chemical resistant, reflective white top plate surface that is easy to clean. Durable aluminum tops will not crack or chip, and provide a more even temperature distribution.|
|Recall Last Temperature||Built-in memory allows users to recall last set temperature, even when unit has been turned off.|
|Heating Capacity||Robust heater allows heating surface to reach set point quickly.|
|Built-In Support Rod Holder||Rear housing features an off centered, built-in support rod holder with locking knob that accepts the optional Support Rod and Clamp Kit.|
|Low Profile Design||Takes up minimal space and fits easily into fume hoods. Spill-resistant design channels fluids away from internal components.|
|Cool Touch Housing||Housing is made of a heat resistant polymer that is not only cool to the touch, but is also chemical resistant.|
|Hot Top Indicator||For additional safety, hot symbol warning light is illuminated when heat is turned on and remains on until top plate cools down.|
For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.
For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.