• Call us at +1-800-352-7705 (M-F, 7:00 am - 3:30 pm EST)

  • My Cart (0)

Troemner Promos
All

Advanced Digital 1 Block Dry Block Heater, 120V

Part # 949500

  • Products with the UL symbol are listed by Underwriters Laboratories Inc and have been evaluated by UL and meet their applicable standards

Part # 949500

This product is no longer available. Click here for a newer model.

Email product to a friend

Availability: In stock

Advanced Digital 1 Block Dry Block Heater, 120VAdvanced Digital 1 Block Dry Block Heater, 120V
Move your mouse over image or click to enlarge
Product Details
Part #949500Temperature RangeAmbient +5°C to 120°C CertificationsUL Listed
Control TypeDigitalTemperature Stability at 37˚C± 0.1° CWarranty5 year industry leading limited warranty on parts and labor.
Block Capacity1 blockUniformity Within the Block at 37˚C± 0.1° CUnit Supplied WithUnits include a 92" (234cm) detachable, 3 wire cord and plug.
Frequency50/60 HzHeat-Up Time to 100˚C45 minOriginManufactured in the USA
Voltage120VDimensions12.4 x 8 x 3.5"
(31.5 x 20.3 x 8.9 cm)		PriceCall us for pricing
Amps0.9Operating ConditionsUnits can be run in conditions from 18 to 33° C (64 to 91°F), 20% to 80% relative humidity, non-condensing  
Watts110ApplicationsDenaturings proteins, DNA applications, ELISA and other immunoassay studies.   


Operating & Safety Features
Microprocessor ControlPID temperature control, with optional RTD probe, offers a temperature stability as low as ± 0.1° C with temperature uniformity as low as ± 0.1° C. Samples are heated to temperature quickly and accurately. Temperature is adjusted in ± 0.1° C increments.
LED DisplayTouch pad controls with easy-to-read, independent LED displays for temperature and time. Provides repeatable and accurate results every time and is easily visible across lab benches. Shows set-point and actual temperatures. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off.
Audible AlarmIn timed mode, alarm will sound when time reaches zero and when unit reaches set-point temperature.
Temperature Calibration ModeAllows user to calibrate unit to an external temperature device.
Caution Hot IndicatorHot warning symbol light is illuminated when temperature is above 40° C.
Overshoot ProtectionIf the unit exceeds the set temperature by 10° C the unit will automatically stop heating.
CAUTION!To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator.


Voltage Explanation

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.


For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Click here for complete voltage details and plug types by country

Literature & Reference
pdf   715071-00 Talboys Dry Block Heaters Instruction Manual Rev 5
Instruction Manual for Talboys Standard and Advanced Dry Block Heaters
Download
pdf   Lab Equipment Guide
The Lab Equipment Guide offers a brief overview of our products for quick reference.
Download
pdf   Talboys Dry Block Heater Catalog Section
Talboys Dry Block Standard and Advanced Dry Block Heaters and Accessories
Download
pdf   Talboys Laboratory Equipment Catalog
Ultimate guide for Lab Equipment includes detailed descriptions, and specifications.
Download

Contact Us

Order Information

Privacy & Security

About

Site Map

US logo