Advanced Digital 1000RS Rocking Shaker, 120V

Part # 980530

  • Products with the CSA symbol assure you that the product meets certain safety standards and performance criteria set by the Canadian Standards Association

Part # 980530

Availability: In stock

Advanced Digital 1000RS Rocking Shaker, 120VAdvanced Digital 1000RS Rocking Shaker, 120V
Move your mouse over image or click to enlarge
Product Details
Part #980530Speed Accuracy±1 rpm Operating ConditionsUnit can be run in cold rooms, incubators and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing.
Control TypeDigitalTimer1 second to 160 hoursApplicationsStaining and destaining gels, hybridization procedures, hematology, and blotting techniques.
Frequency50/60 HzTilt Angle0 to 15°CertificationsCSA Listed
Voltage120VMaximum Capacity10 lb (4.5 kg) centered on trayWarranty5 year industry leading limited warranty on parts and labor.
Amps5Tray MaterialAluminumUnit Supplied WithUnit includes a 92" (234cm) detachable, 3-wire cord and plug. Unit is also supplied with a 12.75 x 10" (32.4 x 25.4cm) non-skid rubber mat.
Watts25Tray Dimensions12.75 x 10"
(32.4 x 25.4cm)
OriginManufactured in the USA
Speed Range1 to 50 rpmOverall Dimensions17 x 11 x 5"
(43.2 x 27.9 x 12.7cm)
PriceCall us for pricing

Operating & Safety Features
Microprocessor ControlThe microprocessor control provides electronic tilt angle adjustment which allows the user to easily adjust rocking angle from 0 to 15° while unit is operating. Precise speed control provides a smooth, low-speed rocking motion down to 1 rpm.
LED DisplayTouch pad controls with easy-to-read, independent LED displays for speed and tilt angle, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab beches. Timer will display elapsed time or, when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off.
Low Profile DesignTakes up less space and easily fits into most fume hoods and incubators. Cast aluminum base offers durability and added stability.
Speed Ramping FeatureSlowly increases speed to desired set-point to avoid splashing.
Spill-Resistant DesignChannels fluids away from internal components.
Overload ProtectionAudible and visual signals will activate when system detects an obstruction or overload of the tray.
Audible AlarmIn timed mode, alarm will sound when time reaches zero.

Voltage Explanation

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.

For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Click here for complete voltage details and plug types by country

Literature & Reference