Advanced Digital 2 Block Dry Block Heater with Heated Lid, 120V

Part # 949502HL

  • Products with the TUV symbol assure you that the product meets certain safety standards and performance criteria set by the International Electrotechnical Commission

Part # 949502HL

Availability: In stock

Advanced Digital 2 Block Dry Block Heater with Heated Lid, 120VAdvanced Digital 2 Block Dry Block Heater with Heated Lid, 120V
Move your mouse over image or click to enlarge
Product Details
Part #949502HLTemperature RangeAmbient +5°C to 100°C ApplicationsIsothermal incubation, enzyme reactions, immunoassays, nucleic acid denaturation and a wide variety of other laboratory procedures.
Control TypeDigitalTemperature Stability at 37˚C± 0.1°CCertificationsTUV Listed
Block Capacity2 blockUniformity Within the Block at 37˚C± 0.1°CWarranty5 year industry leading limited warranty on parts and labor.
Frequency50/60 HzUniformity Across Similar Blocks at 37˚C± 0.1°CUnit Supplied WithUnits include a 92" (234cm) detachable, 3 wire cord and plug.
Voltage120VHeat-Up Time to 100˚C50 minOriginManufactured in the USA
Amps3Dimensions15.4 x 8 x 7"
(39.1 x 20.3 x 17.8 cm)
PriceCall us for pricing
Watts400Operating ConditionsUnits can be run in conditions from 18 to 33°c (64 to 91°F), 20% to 80% relative humidity, non-condensing  

Operating & Safety Features
Microprocessor ControlPID temperature control, with optional external RTD probe, affers a temperature stability as low as ±0.1°C. Samples are heated to temperature quickly and accurately. Temperature is adjusted in ±0.1°C increments.
LED DisplayTouch pad controls with easy-to-read, independent LED displays for temperature, and time. Provides repeatable and accurate results every time and is easily visible across lab benches. Shows set-point and actual temperature. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off.
Audible AlarmIn timed mode, alarm will sound when time reaches zero and when unit reaches set-point temperature.
Temperature Calibration ModeAllows user to calibrate unit to an external temperature device.
Caution Hot IndicatorHot warning symbol light is illuminated when temperature is above 40°C.
Overshoot ProtectionIf the unit exceeds the set temperature by 10°C the unit will automatically stop heating.
CAUTION!To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator.

Voltage Explanation

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.

For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Click here for complete voltage details and plug types by country

Literature & Reference