Advanced Digital 3750 Reciprocating Shaker, 230V

CE mark indicates that this product conforms with the essential health and safety requirements set out in European Directives
PART # 980408 Control Type Digital Frequency 50/60 Hz
Voltage 230V Amps 2.5 Watts 40
Speed Range 20 to 300 rpm Speed Accuracy Above 100 rpm ±1% of set speed Speed Accuracy Below 100 rpm ±1 rpm
Timer 1 second to 160 hours Stroke 19 mm (0.75") Maximum Capacity 15 lb (6.8kg)
Tray Material Aluminum Tray Dimensions 11 x 13"
(27.9 x 33cm)
Overall Dimensions 16.25 x 14 x 5.75"
(41.3 x 35.6 x 14.6cm)
Operating Conditions Unit can be run in cold rooms, incubators and CO2 environments from -10 to 60°C (14 to 140°F), maximum 80% relative humidity, non-condensing. Applications Cell cultures, solubility studies and extraction procedures. Certifications CE
Warranty 5 year industry leading limited warranty on parts and labor. Unit Supplied With Unit includes a 92" (234cm) detachable cord with Euro (type) plug. Unit is also supplied with a 11 x 13" (27.9 x 33cm) non-skid rubber mat. Origin Manufactured in the USA
Microprocessor Control The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-pont and will restart if the power is interrupted.
Shaking System The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ±1% of set speed. When set under 100rpm, speed accuracy is ±1 rpm.
Single Eccentric Drive Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation.
LED Display Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab beches. Timer will display elapsed time or, when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, wvwn after power has been turned off.
RS-232 Interface Provides two-way communication for data logging and unit control.
Speed Calibration Mode Allows user to automatically recalibrate speed display.
Speed Ramping Feature Slowly increases speed to desired set-point to avoid splashing.
Spill-Resistant Design Channels fluids away from internal components.
Load Sensor A built-in load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples.
Overload Protection Audible and visual signals will activate when system detects an obstruction or overload of the tray.
Audible Alarm In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls.
(Size: 385.3 KB)
Instruction Manual for Talboys 1000IC-3 Incubating Cooling Orbital Shaker
(Size: 1 MB)
The Lab Equipment Guide offers a brief overview of our products for quick reference.
(Size: 2.3 MB)
Comprehensive guide for multi-purpose and specialty clamps, connectors and holders, lab-lifts, lab-frame kits, and gas cylinder safety supports.
(Size: 761.7 KB)
Talboys Basic, Standard, Advanced, Pulsing, Heavy Duty, Microplate and Multi-Tube Vortex Mixer and Accessories