Dry Block Heater, 2 Block, HB2AL, US
|PART #||HB2ALUS||Control Type||Analog||Block Capacity||2 block|
|Watts||210 W||Low Temperature Range||Low Ambient +5°C to 100°C||High Temperature Range||High 75°C to 150°C|
|Temperature Stability at 37˚C||± 1.5°C||Uniformity Within the Block at 37˚C||± 0.1°C at 37°C||Heat-Up Time to 100˚C||50 min|
|Dimensions||3.5 in x 15.4 in x 8 in (8.9 cm x 39.1 cm x 20.3 cm)||Operating Conditions||64°F to 91°F, 20% to 80%RH, non-condensing (18°C to 33°C, 20% to 80%RH, non-condensing)||Applications||Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation|
|Certifications||TUV Listed||Warranty||2 years||Unit Supplied With||Detachable 3-wire cord and plug (included), analog models require an external thermometer or temperature device for temperature setpoint|
|Origin||Manufactured in the USA|
- Three models to customize your application. All models offer exceptional temperature uniformity with outstanding temperature stability.
- Avoid contamination to ensure repeatable, reliable results. The heatblock with heated lid features a second heater in the lid to minimize condensation, which maintains your sample integrity.
- Ensure temperature accuracy. Digital models include a unique single-point-calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints.
Versatile Dry Block Heaters are ideal for applications that require temperature stability. All units hold 2 optional interchangeable modular blocks with over 40 choices. Blocks are easy to use, no tools required. Close tube-to-block contact enables maximum heat retention, resulting in efficient heating. Digital models offer exceptional temperature uniformity and stability for repeatable results, while non-digital models are an economical choice.
|Applications||Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation|
|Display||LED display (digital models) and dual-adjustment knobs with dial markings (analog models)|
|Operation||Detachable 3-wire cord and plug (included), analog models require an external thermometer or temperature device for temperature setpoint|
|Construction||Painted steel housing, support rod holder with locking knob|
|Design Features||Touchpad control and audible alarm (digital models)|
For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.
For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.