Dry Block Heater, 4 Block, HB4DG, US
|PART #||HB4DGUS||Control Type||Digital||Block Capacity||4 block|
|Watts||310 W||Temperature Range||Ambient +5°C to 120°C||Temperature Stability at 37˚C||± 0.1°C|
|Uniformity Within the Block at 37˚C||± 0.1°C at 37°C||Heat-Up Time to 100˚C||60 min||Dimensions||3.5 in x 16.9 in x 8 in (8.9 cm x 42.9 cm x 20.3 cm)|
|Operating Conditions||64°F to 91°F, 20% to 80%RH, non-condensing (18°C to 33°C, 20% to 80%RH, non-condensing)||Applications||Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation||Certifications||TUV Listed|
|Warranty||2 years||Unit Supplied With||Detachable 3-wire cord and plug (included), analog models require an external thermometer or temperature device for temperature setpoint||Origin||Manufactured in the USA|
- Designed for flexibility with your applications. The four-block capacity allows you to process multiple samples simultaneously with one device.
- Ensure temperature accuracy. Digital models include a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints.
- Digital models feature easy to use touchpad controls with independent displays for temperature and time. Robust non-digital models are controlled with dual temperature adjustment knobs.
Versatile Dry Block Heaters are ideal for applications that require temperature stability. All units hold 4 optional interchangeable modular blocks with over 40 choices. Blocks are easy to use, no tools required. Close tube-to-block contact enables maximum heat retention, resulting in efficient heating. Digital models offer exceptional temperature uniformity and stability for repeatable results, while non-digital models are an economical choice.
|Applications||Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation|
|Display||LED display (digital models) and dual-adjustment knobs with dial markings (analog models)|
|Operation||Detachable 3-wire cord and plug (included), analog models require an external thermometer or temperature device for temperature setpoint|
|Construction||Painted steel housing, support rod holder with locking knob|
|Design Features||Touchpad control and audible alarm (digital models)|
For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.
For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.