Dry Block Heater, 6 Block, HB6DG, US

tuv.jpg
PART #
HB6DGUS
$1,070.00
PART # HB6DGUS Control Type Digital Block Capacity 6 block
Frequency 50/60Hz Voltage 120V Amps 3.42A
Watts 410 W Temperature Range Ambient +5°C to 120°C Temperature Stability at 37˚C ± 2°C
Uniformity Within the Block at 37˚C ± 0.1°C at 37°C Heat-Up Time to 100˚C 65 min Dimensions 3.5 in x 20.9 in x 8 in (8.9 cm x 53.1 cm x 20.3 cm)
Operating Conditions 64°F to 91°F, 20% to 80%RH, non-condensing (18°C to 33°C, 20% to 80%RH, non-condensing) Applications Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation Certifications TUV Listed
Warranty 2 years Unit Supplied With Detachable 3-wire cord and plug (included), analog models require an external thermometer or temperature device for temperature setpoint Origin Manufactured in the USA
  • Unique design for high throughput applications. The six-block capacity allows you the most flexibility to process multiple samples simultaneously with one device.
  • Ensure temperature accuracy. Digital models include a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints.
  • Digital models feature easy to use touchpad controls with independent displays for temperature and time. Robust non-digital models are controlled with dual temperature adjustment knobs.

Versatile Dry Block Heaters are ideal for applications that require temperature stability. All units hold one optional interchangeable modular block with over 40 choices. Blocks are easy to use, no tools required. Close tube-to-block contact enables maximum heat retention, resulting in efficient heating. Digital models offer exceptional temperature uniformity and stability for repeatable results, while non-digital models are an economical choice.

Applications Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation
Display LED display (digital models) and dual-adjustment knobs with dial markings (analog models)
Operation Detachable 3-wire cord and plug (included), analog models require an external thermometer or temperature device for temperature setpoint
Communication N/A
Construction Painted steel housing, support rod holder with locking knob
Design Features Touchpad control and audible alarm (digital models)

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.


For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Plug type for EU or UK Plug type of CH or AU

Click here for complete voltage details and plug types by country

pdf
(Size: 1.4 MB)
Instruction Manual for Extreme Environment Shakers