Professional Digital 1000-3 Incubating Orbital Shaker, 230V

Part # 980185

  • CE mark indicates that this product conforms with the essential health and safety requirements set out in European Directives

Part # 980185

Availability: In stock

Professional Digital 1000-3 Incubating Orbital Shaker, 230VProfessional Digital 1000-3 Incubating Orbital Shaker, 230V
Move your mouse over image or click to enlarge
Product Details
Part #980185Speed Range100 to 1200 rpmOverall Dimensions17 x 11 x 10.7"
(43.2 x 27.9 x 27cm)
Control TypeDigitalSpeed Accuracy±2% of set speedOperating ConditionsUnit can be run in conditions from 5 to 40°C (41 to 104°F), maximum 80% relative humidity, non-condensing.
Frequency50/60 HzTimer1 second to 160 hoursApplicationsCell cultures, bacterial suspensions and hybridizations.
Voltage230VOrbit3 mm (0.12")CertificationsCE
Amps5Maximum Capacity8 lb (3.6 kg)Warranty5 year industry leading limited warranty on parts and labor.
Watts450Tray MaterialAluminumUnit Supplied WithUnit includes a 92" (234cm) detachable cord with Euro (type) plug.
Temperature RangeAmbient +5°C to 65°CTray Dimensions11 x 7.75"
(27.9 x 19.7cm)
OriginManufactured in the USA
Temperature Uniformity±0.5°C at 37°CInterior Dimensions11.3 x 8.3 x 5.7"
(28.7 x 21.1 x 14.5cm)
PriceCall us for pricing

Operating & Safety Features
Microprocessor ControlThe variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-pont and will restart if the power is interrupted.
PID Temperature ControllerMaintains precise temperature control from ambient +5°C to 65°C. Easy-to-use controls allow users to adjust temperature in 1°C increments.
Triple Eccentric DrivePermanently lubricated ball bearings and maintenance free, brushless DC motor provides reliable service and continuous duty operation.
LED DisplayTouch pad controls with easy-to-read, independent LED displays for temperature, speed and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time, or when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off.
Temperature Calibration ModeAllows user to calibrate the unit to an external temperature device.
Speed Ramping FeatureSlowly increases speed to desired set-point to avoid splashing.
Spill-Resistant DesignChannels fluids away from internal components.
Overload ProtectionAudible and visual signals will activate when system detects an obstruction or overload of the tray.
Audible AlarmIn timed mode, alarm will sound when time reaches zero.
Caution Hot IndicatorSymbol illuminates when the temperature of the air in the chamber reaches 40°C and remains lit until the temperature cools down.
Polycarbonate LidPermits viewing of samples without disturbing the internal temperature.

Voltage Explanation

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.

For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Click here for complete voltage details and plug types by country

Literature & Reference