Microprocessor Control | The microprocessor control provides electronic tilt angle adjustment which allows the user to easily adjust rocking angle from 0 to 15° while unit is operating. Precise speed control provides a smooth, low-speed rocking motion down to 1 rpm. |
PID Temperature Controller | Maintains precise temperature control from ambient +5°C to 65°C. Easy-to-use controls allow users to adjust temperature in 1°C increments. |
LED Display | Touch pad controls with easy-to-read, independent LED displays for temperature, speed and tilt angle, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab beches. Timer will display elapsed time or, when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off. |
Speed Ramping Feature | Slowly increases speed to desired set-point to avoid splashing. |
Spill-Resistant Design | Channels fluids away from internal components. |
Overload Protection | Audible and visual signals will activate when system detects an obstruction or overload of the tray. |
Audible Alarm | In timed mode, alarm will sound when time reaches zero. |
Caution Hot Indicator | Symbol illuminates when the temperature of the air in the chamber reaches 40°C and remains lit until the temperature cools down. |
Polycarbonate Lid | Permits viewing of samples without disturbing the internal temperature. |