Professional Digital 5000IR Incubating/Refrigerating Orbital Shaker, 230V

CE mark indicates that this product conforms with the essential health and safety requirements set out in European Directives
PART #
980475
$0.00
PART # 980475 Control Type Digital Frequency 50/60 Hz
Voltage 230V Amps 10 Watts 800
Temperature Range 15°C below Ambient to 65°C Temperature Uniformity ±0.5°C at 37°C Speed Range 15 to 500 rpm
Speed Accuracy Above 100 rpm ±1% of set speed Speed Accuracy Below 100 rpm ±1 rpm Timer 1 second to 160 hours
Orbit 25 mm (1") Maximum Capacity 50 lb (22.7 kg) Tray Material Aluminum
Tray Dimensions 18 x 18"
(45.7 x 45.7cm)
Interior Dimensions 20.6 x 24.8 x 17"
(52.3 x 62.9 x 43.18cm)
Overall Dimensions 41.1 x 26.6 x 23.5"
(104.4 x 67.5 x 59.6cm)
Operating Conditions Unit can be run in cold rooms, incubators and CO2 environments from 15 to 32°C (59 to 90°F), maximum 80% relative humidity, non-condensing. Applications Cell cultures, solubility studies, bacterial suspensions and extraction procedures. Certifications CE
Warranty 5 year industry leading limited warranty on parts and labor. Unit Supplied With Unit includes a 92" (234cm) detachable cord with Euro (type) plug. Shaker is also supplied with a non-skid rubber mat that fits the 18 x 18" (45.7 x 45.7cm) tray. Origin Manufactured in the USA
  • Exclusive Patented Opti-Flow Forced Ventilation System
  • Exclusive Patented Accu-Drive Shaking System
  • Calibration mode for temperature and speed
  • 5 year industry leading warranty

The Talboys Model 5000IR Incubating/Refrigerating Orbital Shakers are designed for a variety of shaking and incubating applications such as cell cultures. Model 5000IR Incubating/Refrigerating Orbital Shaker is supplied with a non-skid rubber mat that fits the 18 x 18" (45.7 x 45.7cm) tray. Orbital Shakers include a 5 year, industry leading limited warranty on parts and labor.

Operating Conditions: Shaker can be run in conditions from 15 to 32°C (59 to 90°F), maximum 80% relative humidity, non-condensing.

Microprocessor Control The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-pont and will restart if the power is interrupted.
Accu-Drive Shaking System The exclusive Accu-Drive Shaking System delivers exceptional speed control, accuracy and durability. The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ±1% of set speed. When set under 100rpm, speed accuracy is ±1 rpm.
Opti-Flow Forced Ventilation System Uses a powerful induction fan and air delfectors to deliver exceptional temperature uniformity and stability.
PID Temperature Controller Maintains precise temperature control from 15°C below ambient to 65°C. Easy-to-use controls allow users to adjust temperature in 1°C increments.
Triple Eccentric Drive Permanently lubricated ball bearings and maintenance free, brushless DC motor provides reliable service and continuous duty operation.
LED Display Touch pad controls with easy-to-read, independent LED displays for temperature, speed and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time, or when programmed to user defined limit, will shut off when time reaches zero. Display will show last used settings, even after power has been turned off.
RS-232 Interface Provides two-way communication for data logging and unit control.
Temperature Calibration Mode Allows user to calibrate the unit to an external temperature device.
Speed Calibration Mode Allows user to automatically recalibrate speed display.
Speed Ramping Feature Slowly increases speed to desired set-point to avoid splashing.
Spill-Resistant Design Channels fluids away from internal components.
Load Sensor A built-in load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed, or stops unit, to protect samples.
Overload Protection Audible and visual signals will activate when system detects an obstruction or overload of the tray.
Audible Alarm In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls.
Overshoot Protection Unit will shut down and activate audible and visual alarms if temperature deviates ±1°C from set-point.
Caution Hot Indicator Symbol illuminates when the temperature of the air in the chamber reaches 40°C and remains lit until the temperature cools down.
Polycarbonate Lid Permits viewing of samples without disturbing the internal temperature. When the lid is opened, automatic shut off of the circuit will stop the shaker tray to protect the operator.
pdf
(Size: 606.6 KB)
Instruction Manual for Talboys Open Air Microplate Shakers
pdf
(Size: 1 MB)
The Lab Equipment Guide offers a brief overview of our products for quick reference.
pdf
(Size: 2.3 MB)
Comprehensive guide for multi-purpose and specialty clamps, connectors and holders, lab-lifts, lab-frame kits, and gas cylinder safety supports.
pdf
(Size: 761.7 KB)
Talboys Basic, Standard, Advanced, Pulsing, Heavy Duty, Microplate and Multi-Tube Vortex Mixer and Accessories