Standard Analog 1 Block Dry Block Heater, 230V

Part # 949511

  • CE mark indicates that this product conforms with the essential health and safety requirements set out in European Directives

Part # 949511

Availability: In stock

Standard Analog 1 Block Dry Block Heater, 230VStandard Analog 1 Block Dry Block Heater, 230V
Move your mouse over image or click to enlarge
Product Details
Part #949511Low Temperature RangeAmbient +5°C to 100°C ApplicationsCoagulation and RH Studies
Control TypeAnalogHigh Temperature Range75°C to 150°CCertificationsCE Mark
Block Capacity1 blockTemperature Stability at 37˚C± 1.5°CWarranty5 year industry leading limited warranty on parts and labor.
Frequency50/60 HzUniformity Within the Block at 37˚C± 0.4°CUnit Supplied WithUnits include a 92" (234cm) detachable cord with Euro (type) plug.
Voltage230VHeat-Up Time to 100˚C45 min.OriginManufactured in the USA
Amps0.5Dimensions12.4 x 8 x 3.5"
(31.5 x 20.3 x 8.9 cm)
PriceCall us for pricing
Watts110Operating ConditionsUnits can be run in conditions from 18 to 33°c (64 to 91°F), 20% to 80% relative humidity, non-condensing  


Operating & Safety Features
Temperature ControlBimetallic dual thermostat temperature control provides consistent reliable temperature regulation. Samples are heated rapidly to desired set-point. Ideal for fixed temperature applications requiring high repeatability and stability.
Adjustment KnobsDual temperature control knobs with dial markings 1 to 10 for low temperature and high temperature adjustments. Low range knob adjusts from ambient to 100°C and high range knob adjust from 75°c to 150°c.
CAUTION!To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator.


Voltage Explanation

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.


For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Click here for complete voltage details and plug types by country

Literature & Reference