Standard Analog 2 Block Dry Block Heater, 120V

Part # 949512

  • Products with the UL symbol are listed by Underwriters Laboratories Inc and have been evaluated by UL and meet their applicable standards

Part # 949512

  • Multi-purpose use
  • Holds interchangeable modular blocks
  • Analog controls
  • 5 year industry leading warranty

Talboys Standard Analog Dry Block Heater is a high wattage, constant-temperature dry block heater that is economical, versatile and compact. This multi-purpose unit is ideal for incubation and activation cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures.

2 Block Dry Block Heater accepts separate interchangeable modular blocks, accommodating various sample enclosures such as micro-tubes, centrifuge tubes, vials, microplates, and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer. Dry Block Heaters require Talboys modular heating blocks for operation. Modular blocks are sold separately. Dry Block Heaters include a 5 year, industry leading limited warranty on parts and labor.

  • up
  • down

Availability: In stock

Price: $572.00

Standard Analog 2 Block Dry Block Heater, 120VStandard Analog 2 Block Dry Block Heater, 120V
Move your mouse over image or click to enlarge
Product Details
Part #949512Low Temperature RangeAmbient +5°C to 100°C Operating ConditionsUnits can be run in conditions from 18 to 33°c (64 to 91°F), 20% to 80% relative humidity, non-condensing
Control TypeAnalogHigh Temperature Range75°C to 150°CApplicationsCoagulation and RH Studies
Block Capacity2 blockTemperature Stability at 37˚C±1.5°CCertificationsUL Listed
Frequency50/60 HzUniformity Within the Block at 37˚C± 0.1°CWarranty5 year industry leading limited warranty on parts and labor.
Voltage120VUniformity Across Similar Blocks at 37˚C± 0.1°CUnit Supplied WithUnits include a 92" (234cm) detachable, 3 wire cord and plug.
Amps1.7Heat-Up Time to 100˚C50 min.OriginManufactured in the USA
Watts210Dimensions15.4 x 8 x 3.5"
(39.1 x 20.3 x 8.9 cm)

Price: $572.00

Operating & Safety Features
Temperature ControlBimetallic dual thermostat temperature control provides consistent reliable temperature regulation. Samples are heated rapidly to desired set-point. Ideal for fixed temperature applications requiring high repeatability and stability.
Adjustment KnobsDual temperature control knobs with dial markings 1 to 10 for low temperature and high temperature adjustments. Low range knob adjusts from ambient to 100°C and high range knob adjust from 75°c to 150°c.
CAUTION!To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator.

Voltage Explanation

For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.

For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.

Click here for complete voltage details and plug types by country

Literature & Reference