Standard Analog 2 Block Dry Block Heater, 230V
|PART #||949513||Control Type||Analog||Block Capacity||2 block|
|Watts||210||Low Temperature Range||Ambient +5°C to 100°C||High Temperature Range||75°C to 150°C|
|Temperature Stability at 37˚C||± 2°C||Uniformity Within the Block at 37˚C||± 0.4°C||Uniformity Across Similar Blocks at 37˚C||± 0.1°C|
|Heat-Up Time to 100˚C||50 min||Dimensions||15.4 x 8 x 3.5"
(39.1 x 20.3 x 8.9 cm)
|Operating Conditions||Units can be run in conditions from 18 to 33°c (64 to 91°F), 20% to 80% relative humidity, non-condensing|
|Applications||Coagulation and RH Studies||Certifications||CE Mark||Warranty||5 year industry leading limited warranty on parts and labor.|
|Unit Supplied With||Units include a 92" (234cm) detachable cord with Euro (type) plug.||Origin||Manufactured in the USA|
|Temperature Control||Bimetallic dual thermostat temperature control provides consistent reliable temperature regulation. Samples are heated rapidly to desired set-point. Ideal for fixed temperature applications requiring high repeatability and stability.|
|Adjustment Knobs||Dual temperature control knobs with dial markings 1 to 10 for low temperature and high temperature adjustments. Low range knob adjusts from ambient to 100°C and high range knob adjust from 75°c to 150°c.|
|CAUTION!||To avoid possible electrical hazard, do not fill well or block opening with water or other fluids. Unit is designed as a dry bath/incubator.|
For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.
For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.