Vortex Mixer, Heavy Duty, VXHDDG, US
|PART #||VXHDDGUS||Control Type||Digital||Unit Type||Digital|
|Watts||30||Speed Range||300 rpm to 3500 rpm||Speed Range: On Mode||300 rpm to 2500 rpm|
|Speed Range: Touch Mode||300 rpm to 3500 rpm||Orbit||0.2 in||Controls||Digital|
|Capacity||1.1 kg||Duty Rating||Continuous||Dimensions||6.3 in x 9.5 in x 6.6 in (16 cm x 24.1 cm x 16.8 cm)|
|Operating Conditions||39°F to 104°F, 20% to 85%RH, non-condensing (4°C to 40°C, 20% to 85%RH, non-condensing)||Applications||ELISA Assays, PCR Preparations, Digestions, Cell Disruptions||Certifications||TUV|
|Warranty||2 years||Unit Supplied With||Detachable 3-wire cord and plug (included)||Origin||Manufactured in the USA|
- Safe to mix at high speeds - the unique locking design of the mixer accessories allows the mixer to safely operate throughout the entire speed range.
- For the most demanding applications, these mixers utilize a high quality German-manufactured motor, allowing for continuous duty operation and increased load capacities up to 1.1 kg.
- Robust digital and non-digital models offer effective speed control from low rpm for gentle shaking to high-speed mixing for vigorous vortexing of difficult samples.
OHAUS Heavy-Duty Vortex Mixers feature a robust design and the highest quality motor to permit continuous-duty operation with accessories over the entire speed range. Digital models offer a timer and exact speed control when applications demand repeatable results. Non-digital variable speed models are an economical alternative. A wide range of accessories are available for microtubes, microplates and a variety of tube sizes from 0.5 to 50 ml.
|Applications||ELISA Assays, PCR Preparations, Digestions, Cell Disruptions|
|Display||Independent LED displays for speed/time allow the operator to view both settings simultaneously (digital models) and adjustment knob with dial markings for variable speed control (analog models)|
|Operation||Detachable 3-wire cord and plug (included)|
|Construction||Cycoloy, Touch/Standby/On rocker switch (both models)|
|Design Features||Universal holder, foam insert for (38) 1.5 to 2 ml microtubes, universal cover and cup head (included)|
For use in the United States, typical voltage is 120V. 120V units are supplied with standard 3-prong grounded plug.
For use outside the United States or for 230V applications, 230V units are supplied with a Euro type plug. If you require a different plug type, please specify the part number listed below in the comments when ordering. For plug types not displayed below, please contact Inside Sales at +1-800-352-7705. All plugs supplied are standard IEC 320 type connector.